Two independent channels.
Microprocessor control with auto-stop function after batteries full
The LEDindicator shows
AC 220V 50Hz
AA/AAA 1.2V ×2 90-120mA
Operating Temperature: 0-35°C
Charging Time(see Table 1)
Connect the charger to socket (make sure the input voltage is
correct), the RED LED will be glitter three times, the battery
charger stand by for charging.
According to anode and cathode, put the battery in correct slot,
the corresponding LED will be glitter slowly. Enter into the
When the LED stop glitter that means the batteries are full
Take out the battery when fully charged.
Please do not charge the Alkaline or Carbonic battery more than 3
times. Otherwise it may cause battery leakage.
For indoor use only. Do not expose charger in rain, high
temperature or moisture.
Always unplug the charger from outlet before attempting maintenance
It is normal for batteries to become hot during charging and they
will gradually cool down after fully charged.
Charger operation temperature: 0~35°C.
Please read the instruction carefully before using lest for the
charger damage if improper use.
If batteries are stored and not used for more than one week,
recharge them before use.